In case you are thinking about why the LED light located on your Netgear router is blinking red and how to turn it to green, then you have landed on the right article. Here, you will be able to get a grasp over everything that you ought to know about the issue. By the way, in some hacks, you might have to access the Netgear Nighthawk router login page.
Keeping this into consideration, it is recommended that you keep the admin login details of your networking device jotted down on a piece of paper for a quick look when required. With that said, continue reading this article.
[Reasons] Netgear Nighthawk Router Red Light Issue
As mentioned above in the introduction of this article, we will shed light on the reasons that forced the LED light located on your networking device to flash red before teaching you how to resolve the issue.
To justify what we said, here are the reasons that you can walk through:
-
Your Netgear router is not receiving fluctuation-free electricity from its socket.
-
The cable linking the networking devices, i.e. router and the modem is damaged.
-
You have placed the Netgear WiFi router away from the existing modem.
-
Bluetooth speakers are interfering with the signals of your router.
-
The firmware of your router is working on its outdated version.
Now that you have made yourself known to the reasons why you are a victim of the Netgear router red light issue, the time has come for you to go through the troubleshooting hacks to get rid of it once and for all. Keep reading this guide.
[Resolved] Netgear Nighthawk Router Red Light Issue
-
Check the Power Socket
Commence with the troubleshooting process by checking the wall socket that is supplying power to your networking device right now. Is it damaged? In case, it is, then you need to get it repaired. Although this will work wonders for you, on the off chance, it does not, then you ought to plug your router into some other wall socket. We hope this works for you.
-
Replace the Ethernet Cable
Have a look at the cable that is connecting the router and the modem. Any cuts found? Yes? Well then, it is a sign that you need to get it changed. Once you bring a new cable home, connect one end to the modem and another to the router. Ensure that the link which you are establishing is finger-tight. Leaving the connection loose will only cause issues.
-
Bring the Devices Closer
The networking devices in your house are supposed to be kept close to each other. This is so the signals emitted from them are able to get transmitted properly. However, if they are kept far from each other, then it is no shocker why the LED on your device is blinking red right now. Taking this into account, bring your devices a little closer to each other.
-
Avoid Signal Interference
Bluetooth speakers are known to emit electromagnetic waves that can interfere with the signals emitted from your networking device thereby compelling the LED lights on it to go crazy. Therefore, you need to keep WiFi interference at bay by changing the location of your router and keeping it away from Bluetooth speakers and other similar devices.
-
Update the Router Firmware
As soon as you are done walking through the troubleshooting hacks mentioned above, you will be able to resolve the Netgear router red light issue. By any chance, if you are unable to, then make use of the default web address and login details to update the firmware of your device. If you come across the routerlogin not working issue, use the IP instead then.
Conclusion
These were the troubleshooting hacks following which you will be able to resolve the Netgear router red light issue. On the off chance, you are still stuck with it; you are left with no other option than to reconfigure your networking device. This can be done with the help of three methods. For the same, refer to the user manual of your Netgear WiFi device.
What do you think of this article? Did you like reading it? Well, in that case, think no more and share your feedback with your fellow readers by making use of the comment section. Trust us; you will not regret doing so. If you do not believe us, drop a comment in the section below and see for yourself. You might end up surprising yourself for the best.