Linksys Extender SSID Not Showing on Network List?


Are you worried because your Linksys extender’s SSID is not showing on the list of networks? If your answer is a big yes, then there is nothing to get worried. Yes, that’s true! You are not alone in the battle. Around 90 percent of users are daily experiencing the “Linksys extender not broadcasting SSID” issue. So just relax and know and know that we have got you covered.

Here, we have mentioned a couple of effective fixes through which you can make the extender’s SSID broadcast while relaxing on your couch. So, stick to this 3-minute read!

Fixed: Linksys Extender Not Showing on Network List

FYI, “Linksys extender not showing on network list” and “Linksys extender not broadcasting SSID” are the same. Both the lines have the same meaning!

Fix 1: Relocate the Linksys Extender

Is your WiFi range extender placed inside your cabinet? Or, you have placed it beneath your study table? If so, then you have the first reason in hand why you can’t see the extender’s SSID on the list of networks. So, we recommend you relocate your WiFi range extender right away.

Make sure to place the device at the central location of your home and on a higher shelf. Do not hide it inside your closet or cabinet.

Now, see if you are still facing the same issue. If yes, then ensure that the smart device you are using to access the extender’s SSID is within its range.

Fix 2: Place Your Extender and Router Closer

Have you placed your WiFi range extender and router at a distance? If yes, then that’s really not a good thing you did. Your devices must be placed in closer proximity.

So, to make the most out of your WiFi range extender, unplug it and move it where you have kept your router. Don’t bother if you don’t have another wall socket for your WiFi extender. Just make use of an extension cord to make things work for you.

Once you are done placing your extender and router in close proximity, grab an Ethernet cable and connect its one end into your router and other end into your extender. Make sure that the cable you are about to use is non-damage and in working condition.

Fix 3: Power Cycle Your Linksys Extender

Sometime, due to a minor technical glitch, you may force to experience the issue. Don’t worry! You can easily get rid of the technical glitches by power cycling your WiFi range extender.

Follow the guidelines outlined underneath and know how to power cycle your WiFi extender:

  • First things first, make sure to unplug your WiFi extender from its respective wall outlet.

  • After unplugging the extender, wait for a few minutes.

  • Now, if you think that you have given sufficient time to your extender to cool down and rest, plug it back in again.

  • Allow the power LED on the extender to get stable. Be patient! The LED on the WiFi extender may take a few minutes to become lit.

After performing the Linksys extender power cycling process, access its SSID and see if you rack up success or not.

Need More Help?

If the above-mentioned fixes don’t bring you any luck, then here are two more fixes that you can apply.

  • Be sure that the SSID of your WiFi range extender isn’t hidden. If it is hidden, enable it, refresh the network list, and have access to it right away.

  • If you have changed the WiFi network name (SSID) of your WiFi extender, ensure that you are accessing the correct one.

Anticipating that the troubleshooting hacks we have listed here help you resolve the issue you were facing with your Linksys WiFi range extender.


Please enter your comment!
Please enter your name here